SCUBAPRO-UWATEC galileo luna, Manual

Page: 24 / 76

2. Menus, settings and functions
22
2. Menus, settings and functions
2.3.7 Desaturation reset
Galileo allows you to reset the desaturation
in the computer. Any tissue saturation
information from a recent dive will be reset
to zero and the computer treats the next
dive as a non-repetitive dive. This is useful
when the computer is loaned to another
diver who has not dived in the last 48 hours.
!
WARNING
Diving after having reset the desaturation
is extremely dangerous and is very likely to
cause serious injury or death. Do not reset the
desaturation unless you have a valid reason to
do so.
To prevent accidental desaturation reset,
you must enter the safety code once you
decide to proceed with the reset. The
safety code is
313 . Once inside the menu
the word CODE will appear. To enter the
code, use the “ + ” and “ – ” buttons to define
the first digit ( 3 ), then press “ >> ” to confirm
it. Now define the next digit ( 1 ), confirm by
pressing
“
>>
”, then define the last digit
( 3 ). Pressing “ SAVE ” after having defined
the last digit will complete the desaturation
process. The display shows the message
DESATURATION RESET SUCCESSFUL
for 2 seconds. Note that the reset of the
desaturation is entered into the logbook for
tracking purposes.
F
NOTE:
Removing and replacing the battery
will not reset the desaturation. Galileo
stores tissue saturation information
in non-volatile memory. For the time
during which the computer is without
battery, the desaturation calculation
is frozen and resumes from where it
had left off as soon as a new battery is
installed.
2.3.8 All-silent mode (default: OFF)
In this menu you can turn off the sound so
that the computer will not beep under any
circumstance. Setting the
ALL-SILENT
mode to ON overrides any setting you
choose for individual warnings (described
in section 2.6) and also mutes all alarms
(described in section 3.2). The wake-up
alarm will also be disabled.
!
WARNING
Muting all alarms can lead you into potentially
dangerous situation and could result in serious
injury or death.
If you choose
ALL-SILENT ON
, you will be
required to enter an additional confirmation
in the form of a safety code. The safety
code is
313 . This prevents unintentionally
setting the ALL-SILENT to ON . To enter
the code, use the “ + ” and “ – ” buttons to
define the first digit ( 3 ), then press “ >> ”
to confirm it. Now define the next digit (
1
),
confirm by pressing “ >> ” then define the
last digit ( 3 ). Upon pressing “ SAVE ” after
having defined the last digit, ALL-SILENT
will be set to ON and you will have no
audible signals of any kind. The display
shows the message
ALL-SILENT ON
SUCCESSFUL for 2 seconds.