- 7 -
5.2.)
In Test mode:
The camera will shut down automatically after one minute if no key is
pressed, for saving the battery.
Indicator LED:
a
、
When the power switch to the ON mode/Live mode, the motion indication LED (green)
will blink for 15s then enter into live position.
b
、
Set mode : Red LED
5.3.)
Powering on
(shown in fig.1)
Once you have prepared your trail camera by properly
Installing an SD card and batteries or external DC, you
could switch on the power. The trail camera has three basic
operation modes:
OFF
：
Power switch at
OFF
position
fig.1
Test
：
Menu setting and
Test
mode
ON
：
Power switch in the
ON
position
/Live
mode (LCD screen is off)
When you switch on the power, have the frame of starting and indicated voice,
for stable starting the camera system need 5 seconds
Test
mode /
Menu setting
mode is moving the power switch to the
Test
position. In
Test
mode can do following operation:
A. Parameter setting:
press “
Menu
” key for parameter setting
B. Manually taking picture and recording the videos:
press
Up/Down
for capture picture
and videos, and could check the picture with built-in LCD.
C. Play back the picture or videos: select Playback
from camera mode, or press “
OK
”
key continue 5s.
Fig.2
5.4.)
manually capture (
shown in fig.2)
Can press the shortcut key “
Up (photo)/Down (video)
Capture photo:
In Test mode, check the photo with built- in LCD,
press OK, saving the picture to the SD card automatically
