- 16 -
d)
Press
Menu
return to
Test
mode
⑽
Time stamp : ON/OFF
This parameter defines whether the time should be stamped in the pictures and videos clips or
not.
Default setting: “ON”
In
Time Stamp
mode:
a)
Press
Up
or
Down
to select
ON/OFF
b)
Press
OK
to save the current setting
c)
Press
Left
for cancel setting operation without any saving and return to last step.
d)
Press
Menu
return to
Test
mode
⑾
Set Clock
: (month/date/year) the valid year from 2010-2030, time: hour/minute)
Default setting: as
“01:01:2011 12:01”
In
Set Clock
mode:
a)
Press
Left
or
Right
to select month/date/year—hour: mins
b)
press
Up
or
Down
to change the value.
c)
Press
OK
to save all current setting
d)
Press
Menu
return to Test mode
⑿
Sensor Level : High/Normal/Low
This parameter defines the sensitivity of the PIR, the higher degree indicates that the camera
is more easily to be triggered by motion, taking more pictures or recording more videos, it is
recommended to use high sensitivity degree in room or environment with little interference, and to
use lower sensitivity for outdoor or environment with lots of interference like hot wind, smoke,
near window etc. Furthermore, the sensitivity of the PIR is strongly related to the temperature.
Higher temperature leads t lower sensitivity. Therefore it is suggested to set a higher sensitivity for
high temperature environment.
Default setting: Normal
In
Sensor Level
mode:
a)
Press
Up
or
Down
to select
High/Normal/Low
b)
Press
OK
to save the current setting
c)
Press
Left
for cancel setting operation without any saving and return to last step.
d)
Press
Menu
return to
Test
mode
⒀
IR LED : ON/OFF
“ON”
means IR LED is enable, the camera will work with IR LED when the light is not enough,
for capture the high quality picture; off means IR LED is disable, no working in the night time.
