- 21 -
9
、
Mounting the SG-660 series
When you want to use the on/live mode of the device in the outdoor, such as hunting and
monitoring the living habits of wild animals, you must mount the device on a certain place
properly. SG-660 series, design with skid sawtooth, a belt hole, a steel cable hole, security lock
hole. Mount the trail camera using those compositions.
There are four way to mount the trail camera
1
、
Using the belt
2
、
Using a rope or a steel cable lock
3
、
Using a belt and a steel cable lock more firmly
4
、
For security, lock the locking hole .
It is recommended to mount the device on a tree whose diameter is about 15cm. To get the
optimal picture quality, the tree can be 3- 6 meters away from the place to be monitored, and at a
height of 1.5 to 2 meters. The aiming direction of lens and the movement direction of object should
be orthogonal. (It is recommended that you mount the camera 4-5 ft off the ground with the
camera pointed at a slight downward angle.)
Be sure to avoid mounting the camera facing east or west as the rising and setting of the sun
could produce false triggers and over exposed images. Clear all branches and other debris away
from the front of the camera so as not to block the camera lens or PIR sensor.
You can avoid false triggers, you should adjust it, depend on the object or wild animals’ size,
moved speed and distance.
PIR Coverage Area
Diagram
