- 9 -
A
、
USB review:
after take back the camera, switch
OFF
the device, connect the device to the PC with a USB
extension cable, and then run a commercial program with an image browser or an image browser built
in the operation system to view images (or video clip) saved in the SD-card under the directory of
\DCIM).
B
、
Use a TV monitor to review:
After take back the camera, switch the mode from
OFF
position to
Test
position, continued press
“
OK’
5s, then can enter into viewer, or select
Playback
from camera mode.
* Press
Left
key for the previous picture and the
Right
key for the next one, at any time pressing
“
OK”
continued 5s again will return to the
Test
mode.
* Press
Up/Down
key for blow up and shorten the image, press “
OK”
one time, then go back to
original image. Press
Menu
, and select the picture, press
OK
for selecting
Delete one
or
Delete all
picture.
* When review the video clips, press
Up/Down
for adjust the voice, press
Menu
one time, after
press
OK
for selecting
Delete one
or
Delete all
video clips.
C
、
Review image directly from SD card:
Take out SD-card; use PC with SD-card viewer.
D
、
Review with camera LCD:
same review as connect with TV monitor
Save the images and videos in the folder by date, “
.jpg
” for picture ”
.asf
” for videos.
For undertaking more parameter, the detailed operations will be described in “Advanced
Operations” chapter. Please enter into
Menu
for checking all the current parameter.
5.7.)
Powering Off
(shown in right fig.4)
Fig.4
Slide the power switch to the
OFF
position to power off the camera, when you don’t
need to use it, please note that even in the
OFF
mode, the trail camera still consumes certain
power at UA level. Therefore, be sure to take the battery out of the battery depot if the device
will not be used for a long time.
