- 6 -
5
、
Quick Overview
The trail camera uses a standard SD (secure digital)memory card to save photo (in jpg
format) and / or videos(in .ASF format)
The supported card size of the device is from 8MB to 32GB, and the file format supported
is FAT12 and FAT16
.
Here are some important notices. You don’t need to concern about
the file system format of the camera unless you have problems with reading the SD-card
by your other equipments. If this happened, please format the SD-card in the camera or in
a computer at first and then reinsert the card into your camera to make a try.
It is recommended to use the SD-card with a quality-guarantee. Please insert the SD-card
when the power switch is at
OFF
position before testing the camera. The camera has no
internal memory for saving images or videos. If no SD-card is inserted, the camera will
shut down automatically after a continuous indication sound.
Formatting the SD card by using the trail camera’s format parameter before using it for the
first time is recommended, especially when a card has been used in other devices. The
system will delete all images or videos stored in the SD-card after formatting, make sure
that you have made a backup of important data.
Before inserting the SD card, Please make sure
the sheet metal surface is down, that the
write-protect of the card is off. So that it is writable.
Please fit the SD card to the SD card slot, a slight snapping sound of the card indicates that
the card is connected successfully, by the wrong side the card will be blocked for snapping
in. Be careful, the SD card can be plugged in only one direction.
To take out the SD card, just push in the card gently, the card is released from the slot
when you hear a slight snapping sound.
5.1.)
Power:
Two methods to supply power
z
Insert each battery with correct the polarity, recommends using alkaline AA batteries
or
lithium
rechargeable batteries.
z
External DC power supply source, input 110-240v, 50/60Hz,output
6V/1A( first connect
with camera, after plug in the socket)
