Scout Boats 350 LXF, Owner'S Manual

Page: 85 / 166

85
Exterior Equipment
Hardtop Switch Panel and Sunshade Control Switch
Hardtop with Optional Sunshade Extended
Fiberglass Cockpit Sunshade
The optional fiberglass sunshade extends to pro -
vide shade for the aft cockpit. An electric actuator
controlled by a programmable switch panel in the
hardtop extends and retracts the sunshade. A
removable lockout pin near the sunshade switch
prevents it from extending when there are rods in
the rod holders at the rear of the hardtop.
The pin should be engaged whenever the sun-
shade is fully retracted to ensure the sunshade is
not accidently extended with rods in the rod hold -
ers. Always remember to remove the pin before
extending the sunshade.
There are six buttons in the switch Panel that
control the sunshade. The buttons with the ar-
row indicators are preset to extend or retract the
sunshade when they are pressed. The sunshade
will stop whenever the arrow button is released.
Limit switches automatically stop the sunshade
when it is fully extended or retracted. Buttons
one through four are programmable and are pre-
programmed by Scout as follows:
1. Out
2. In
3. Rough water position
4. In
Hardtop and Rod Holders with Optional Sunshade Retracted
SUNSHaDe
SWitCH PaNeL
LOCKOUT PIN