Let’s get your new Stabilizer out!
Your 4th axis stabilizer (also called a Z axis stabilizer) comes to you fully
assembled. All you need to do is add your mount to your gimbal and connect it.
You’ll also find this printed guide, an M3, M4, M5 allen keys and an M6 socket
which are used for tuning and upgrades but typically you should rarely need to
use them as the stabilizer is mostly tool-less.
Note:
Your stabilizer is fully tuned out of the box so don’t be tempted
to go and tighten everything before you start or else you’ll have to go
over the re-tuning process unessesarily!
The only parts you’ll normally be adjusting are the handles, payload adjusters,
fluid damping adjusters and stabilizer arm attachments which are all tool-less!
The re-tuning section near the end of this guide is helpful if you make upgrades to
your stabilizer or on the rare occasion that the stabilizer has become out of tune.
4
User Guide - Glider Pro 3 Duo - 4th Axis Stabilizer - 20180917 ScottyMakesStuff.com