the arms roughly in the right position then you evenly bounce your hands
down and let it bounce back up to see if the gimbal favours one side or the
other.
If your gimbal bounces say to the right then the right Payload Spring is
weaker than the left and you need to increase the payload adjuster tension
on the right side to even it up with the left. When your gimbal bounces
straight up you’re all set to start your test shot!
5. Let’s be optimistic and start at this low setting! Film the movement with
this setting and if possible look at the results on a monitor to see 1) how
well bounce was controlled and 2) if you lost your framing or not. If you’re
not there yet then increase both Payload Spring Adjustment Knobs exactly
the same quantity of revolutions towards the positive, check with a ‘Bounce
Test’ and then shoot again and repeat until you find the optimal balance
(
pun intended!
) for your own style of filming.
17
User Guide - Glider Pro 3 Duo - 4th Axis Stabilizer - 20180917 ScottyMakesStuff.com