62
CHAPTER 6: MAINTENANCE
087-0048 REV B
SCOTT SAFETY
Use caution when accessing other folders as they contain files that can only be
changed through the Test Station Software.
Caution:
Do not delete any files from the USB Pen Drive as the Test Station does not
store this information internally outside of the USB.
Retrieving Test
Records Using the
Test Station Software
This section describes retrieving the Test Station’s test records using the Test Station
Software.
Test records contain detailed dates and times for individual bump test and calibrations.
The test record is listed at the top of the page and starts with TS-ProZM_Serial
Number.
1
Select either IR or USB Disk and then click READ, depending on the location of
the USB Pen Drive.
2
The Test file automatically populates. Click the check box next to the test file and
click READ again. See
.
Figure 44
Test Station Software Test Records
3
The Browse For Folder Dialog Box appears. Select the location to store the file.
By default these file are .CSV and should be opened using MS Excel. This is the
default location for both test files and event logs. See
Summary of Contents for Protege ZM
