Scott Safety HushAir Connect 7500 User Manual Download | Manualshive

Page: 116 / 120

background image

94

APPENDIX B: SUPPORT

087-0067 REV A

SCOTT SAFETY

Limited Warranty

Scott Safety (SCOTT), warrants the Compressor, Charge Station and Storage (THE
PRODUCTS) to be free from defects in workmanship and materials for a period of
five (5) years from the date of original manufacture by SCOTT or 1000 hours
whichever comes first.

This warranty applies to all components of THE PRODUCTS, EXCEPT expendable
components such as oil, air filters, oil filters.

SCOTT's obligation under this warranty is limited to replacing or repairing (at
SCOTT's option) THE PRODUCTS or components shown to be defective in either
workmanship or materials.

Only personnel of SCOTT or, when directed by SCOTT, authorized SCOTT agents
are permitted to perform warranty obligations. This warranty does not apply to defects
or damage caused by any repairs of or alterations to THE PRODUCTS made by
owner or any third party unless expressly permitted by SCOTT product manuals or by
written authorization from SCOTT.

To obtain performance under this warranty, and as a condition precedent to any duty
of SCOTT, the purchaser must return such products to SCOTT, a SCOTT authorized
distributor or a SCOTT authorized service center. See “

Technical Service

This warranty does not apply to any malfunction of or damage to THE PRODUCTS
resulting from accident, alteration, misuse, or abuse.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIEDINCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN ADDITION, SCOTT EXPRESSLY DISCLAIMS
ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN ANY WAY CONNECTED WITH THE SALE OR USE OF SCOTT
PRODUCTS, AND NO OTHER FIRM OR PERSON IS AUTHORIZED TO
ASSUME ANY SUCH LIABILITY.

«
...
114
115
116
117
118
...
»

Summary of Contents for HushAir Connect 7500

























































































































Reviews:

No comments

Related manuals for HushAir Connect 7500

Brand: Parker Pages: 22

Brand: Trotec Pages: 17

Brand: PLASMATECH Pages: 23

Brand: Strend Pro Pages: 64

Brand: King Canada Pages: 3

Brand: Grizzly Pages: 17

Brand: SATA Pages: 136

Brand: Delta Pages: 24

Brand: Delta Pages: 72

Brand: Danfoss Pages: 74

Brand: Sakura Pages: 4

Brand: L&W Compressors Pages: 188

Brand: RIDGID Pages: 76

Brand: HARDER & STEENBECK Pages: 60

10020CHAD-22060

Brand: California Air Tools Pages: 17

Brand: Campbell Hausfeld Pages: 24

Brand: Campbell Hausfeld Pages: 24

Frick RXB Plus 12

Brand: Johnson Controls Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands