Scorpa 2008 SY-250FR 15thA Manual Manual Download Page 168

Page: 168 / 183

10.1

Rear brake control removal



Remove the rear wheel (see “rear wheel

removal”).



Remove the rear brake calliper.



Unscrew the rear brake pedal bolt.



Take out the bolt and remove the pedal.



Unscrew the liquid container screw.



Warning: the liquid container must be kept
with the cap upwards to avoid the air bleed.



Unscrew the 2 rear brake master cylinder

fixing bolts and remove it.



To remove the brake hose : unscrew the

master  cylinder  fixing  hose  fixing  bolt  then
unscrew  the  slave  cylinder  hose  fixing  bolt
(Warning  :  the  liquid  is  corrosive  for  the

painting and dangerous for the body).

10.2

Rear brake control installation



To install the hose : screw the pipe portion bolt

to the master cylinder after changing the
washer seals, then screw the pipe portion bolt
the slave cylinder after changing the washer

seals.



Install the rear master cylinder and the 2 fixing

bolts.



Install the liquid container then screw the two
fixing bolts.



Lubricate the brake pedal spacer.



Install the brake pedal and install the fixing

bolt.



Screw the pedal axle nut.



Install the rear brake calliper.



Install the rear wheel (see “rear wheel
installation”).



Warning : if the hose has been removed, you
must air bleed the front brake control.

Summary of Contents for 2008 SY-250FR 15thA
























































































































































































Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands

Scorpa 2008 SY-250FR 15thA, Manual Manual

Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands