Scorpa 2008 SY-250FR 15thA Manual Manual Download Page 62

Page: 62 / 183

Radiator

2.1

Radiator removal

Remove the fuel tank cover, the cleaner case (refer to “side covers removal”).

Remove the fuel tank and the side covers (refer to “fuel tank removal”).

Unscrew the water pump hose collar.

Unscrew the radiator cap.

Take out the water pump hose and keep the liquid cooler.

WARNING:

this operation must be done only when the engine is cold. Don‟t throw out the liquid in

the nature.

Unscrew the radiator fixing bolt.

Unscrew the engine hose collar and take out the hose.

Unplug the temperature sensor.

Remove carefully the radiator from the frame.

Unscrew the radiator hose collars and take out the radiator hoses.

2.2

Radiator installation

Install the hose on the radiator and screw the collars.

Plug the temperature sensor.

Install the radiator in the frame.

Screw the radiator fixing bolts in the walnut.

Install the hose on the engine and screw the collar.

Install the hose on the water pump and screw the collar.

Summary of Contents for 2008 SY-250FR 15thA
























































































































































































Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands

Scorpa 2008 SY-250FR 15thA, Manual Manual

Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands