Scorpa 2008 SY-250FR 15thA Manual Manual Download Page 34

Page: 34 / 183

6.9

Tires

Here are the different principles to follow, with the aim to improve the use life, the performances and

the security of your tires.

Air in the tires : it must be checked and adjusted before each use :

Recommended pressure (checks on cold tires

)

Front tire

Rear tire

100kPa (1,0kgf/cm² ; 15 psi)

120 kPa (1,2kgf/cm² ; 18 psi)

WARNING

The load carried by the vehicle has an important impact on the engine performances, on the braking, on the suspension, but first and foremost

on the road holding and on the tyres performances. To avoid risks at the maximum, a few precautions have to be taken:

DO NOT EXCEED THE TECHNICAL MAXIMAL LOAD. That could damage the tyres, and even

the lost of control by the rider so that an accident could happen.

Make sure meticulously that the transported objects are efficiently stowed. Try to place the

heaviest objects near the center of the bike, and check they are well shared out among the

left and the right.

Adapt the air in the tires to the transported load.

The air in the tires, their condition and the depth of their treads must be checked before each

use.

6.9.1

Check of the conditions and of the treads depth of the tires

Some conditions must imply the replacement of the concerned tire:

If the depth of the treads has reached the minimum legal value,

If there are one or some foreign bodies (nail, glass or metallic fragments) inlaid in the

tire,

If the flanks of the tire are cracked.

NB: the minimum depth of the treads is not the same everywhere in the world. That is why it is

advisable to respect the legal value of the Country where you are riding.

6.9.2

Pieces of information about the tires

The front and rear tires are preferably from the same manufacturer, with the same

structure, with the aim to improve the road holding.

Here are the different tires which are homologated for the SCORPA SY-250FR 15thA :

FRONT :

Mark

Dimensions

Model

MICHELIN

2,75-21‟‟

Trial competition

REAR :

Mark

Dimensions

Model

MICHELIN

4,00-18‟‟

Trial competition

Summary of Contents for 2008 SY-250FR 15thA
























































































































































































Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands

Scorpa 2008 SY-250FR 15thA, Manual Manual

Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands