Scorpa 2008 SY-250FR 15thA Manual Manual Download Page 175

Page: 175 / 183

Clutch control

15.1

Clutch control removal



Remove the air cleaner case (see « air cleaner
case removal »).



Remove the fuel tank (see « fuel tank
removal »).



Unscrew the attaching slave cylinder bolt.



Remove the slave cylinder.



To remove the master cylinder from the

handlebar: unscrew the 2 master cylinder
bracket bolts.



To remove the master cylinder cover: unscrew

the 2 cover bolts (warning: this task must be
done the master cylinder fixed to the

handlebar, and the bike stable and straight).



To remove the lever: unscrew the nut then
unscrew the bolt and finally remove the lever

(be careful to the spacers).



To remove the hose, unscrew the pipe portion

bolt, near the slave cylinder then near the
master cylinder (warning: the liquid is

corrosive for the painting and dangerous for
the body).

15.2

Clutch control installation



To install the hose : screw the pipe portion bolt
to the master cylinder after changing the

washer seals, then screw the pipe portion bolt
the slave cylinder after changing the washer
seals.



To install the lever: put the 2 spacers then
screw the bold after positioning the lever and

finally, screw the nut.



To install the master cylinder cover: screw the
2 cover bolts.



To install the master cylinder on the
handlebar: install the bracket and screw the 2

fixing bolts.



Install the slave cylinder.



Screw the slave cylinder fixing bolt with hard

locking agent.



Install the air cleaner case (see “air cleaner

case installation”).



Install the fuel tank (see “fuel tank

installation”).



Warning: if the hose has been removed, you
must air bleed the clutch control.

Summary of Contents for 2008 SY-250FR 15thA
























































































































































































Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands

Scorpa 2008 SY-250FR 15thA, Manual Manual

Search results

Summary of Contents for 2008 SY-250FR 15thA

Reviews:

Related manuals for 2008 SY-250FR 15thA

Brands by name

Popular brands