background image

Picture 1: eHealth100-Terminal

Table 1: keypad configuration 

2.2 Card contacts

The eHealth100 terminal features two card contacts for use with the current health insurance
card, the electronic health card (eGK) and the health professional card (HPC).

Picture 2: Card slots

5

1. G

ENERAL

The eHealth100 terminal was specifically designed to support the newly defined electronic
health card (eGK) in Germany. It fulfils all requirements for secure use of the chip-based 
electronic health card. In addition, the terminal provides reliable support for the already exist-
ing health insurance card (KVK). 

Please make sure that only authorized personal can access the terminal. The terminal should
be placed in a secure working environment which is safe against manipulation. 

1.1 Security notice

Please follow all instructions to ensure safe operation:

• Only use the power supply and cables that have been provided with the terminal.
• Do not drop the terminal and do not place the terminal where it is in danger of being struck,

knocked or otherwise harmed.

• Keep dust, objects and liquids from entering the terminal (danger of short-circuit, electronic

shock)!

• The terminal is not waterproof! Do not submerge the terminal! Safeguard the terminal

against rain or other sources of moisture. Do not use water or other liquids to clean the 
terminal.

• When transferring the terminal to another party, please keep the device together with the

manual to ensure professional and safe use.

• Please use the original packing or other suitable packaging for reshipment or other trans-

port to safeguard the terminal against shock, impacts, humidity and electrostatic discharge.

• Keep out of the reach of children!
• Please dispose the terminal in an environmentally suitable way.

1.2 Scope of Delivery

Included in delivery:

• 1 eHealth100 terminal
• 1 power supply
• 1 USB cable
• 1 network cable (2m)
• 1 datasheet "eHealth100" from SCM Microsystems
• 1 customer information sheet
• 1 manual

2. O

PERATING

D

EVICES

2.1 Keypad

The eHealth100 health card terminal has an integrated keypad to ensure secure PIN entry. 

4

Functions 

Numeric keypad 

keys 0-9

* unassigned

unassigned

X

Abort

I

Delete

Å

Back

Confirm

Summary of Contents for eHealth100

















Reviews: