Scireq flexivent, User Manual, Page: 76 / 86

74
8)
Secure the cylinder and the wrapped piston to the plastic with tape or rubber bands.
The piston should not move within the cylinder if this is done properly.
9)
Secure the wrapped assembly to a piece of rigid plastic or cardboard similar to that shown
in Figure
5-7.
10)
Tape the container with the O-ring and screws to the back of the rigid board.
11)
Place the module in an appropriately sized box with 4-6” of padding on all sides.
12)
Place the cylinder in the box such that it is padded on all sides and does not move about.
5.8 REPLACEMENT COMPONENTS
A selection of components used with the flexiVent FX need to be replaced periodically. To order
replacements, contact SCIREQ Customer Relations. The following table includes a listing of
frequently replaced products:
TABLE 5-1: LISTING OF REPLACEMENT PRODUCTS
PRODUCT CODE DESCRIPTION
ANP-1000 standard particle size Aeroneb nebulizer
ANP-1100 small particle size Aeroneb nebulizer
FV-FEV1-FT tubing kit for integration of rotameter into NPFE extension
FV-FEV1-YFX Y-tubing kit for NPFE extension
FV-FXA-SK123 service kit for FX adapter, Modules 1, 2 and 3
FV-FXA-SK123N service kit for FX adapter with nebulizer mount, Modules 1, 2 and 3
FV-FXA-SK456 service kit for FX adapter, Modules 4 and 5
FV-FXA-SK456N service kit for FX adapter with nebulizer mount, Modules 4 and 5
FV-FXM[1-5]-I
flexiVent
FX Module [1-5] inspiratory cartridge