Scireq flexivent, User Manual, Page: 52 / 86

50
4 ACCESSORIES
The
flexiVent
FX system may be customized for a variety of applications through the
incorporation of one or more accessories. To ensure proper function, the experimentation
template you select must correlate to the accessories in your configuration. For details
regarding template selection, naming convention and customization, refer to the
flexiWare user
manual.
4.1 UNIT TRANSDUCERS
Per section 1.2.3, a UNIT contains between one and four sensor elements or other input/output
channels, each permitting the measurement or modification of a physical property. In the case
of UNIT transducers, the sensing elements are intended to monitor and record vital signs (e.g.
body temperature) and other parameters (e.g. pressure). UNIT transducer cables plug into the
auxiliary ports at the rear of the
flexiVent
FX (see section 2.2).
4.1.1 USING UNIT TRANSDUCERS
UNIT transducers are designed for immediate use without the need for calibrations, amplifiers
or additional signal conditioning. Transducer identification and calibrations are stored within
the UNIT to eliminate uncertainty during experimentation or data review. If you prefer to
manually calibrate a UNIT transducer before each experimentation session, contact SCIREQ
Technical Support and request a custom SDM.