Scireq flexivent, User Manual, Page: 40 / 86

38
2)
Power off the
flexiVent
and disconnect it from the power supply.
3)
Open the base unit protective cover.
4)
Lower the module onto the base unit.
The module snaps into place once it is positioned correctly
5)
Tighten the module securing screw (see Figure 2-9).
6)
Attach the piston rod to the motor arm per Figure 2-10.
FIGURE 2-10: PISTON ROD CONNECTED TO THE MOTOR ARM (RIGHT)
2.7 CONFIGURING FLEXIWARE
The
flexiVent
FX is operated by
flexiWare
software. To complete the instrument installation,
please refer to the
flexiWare
user manual, section 2 (
Set Up & Installation
). These sections
guide you through the steps necessary to connect the
flexiVent
to the workstation(s), server or
network desired.