63
5. Pull the bi-directional bearing mounts off the ends of the bi-directional
jackshaft (A1663).
6. Unhook the bi-directional chain. Slide chain off the right side of the right
side sprocket (A1135).
7. Remove the bi-directional jackshaft assembly by sliding the assembly out
the left side of the unit.
8. Check the condition of the bearings (P1665) in the bi-directional bearing
mounts. Replace, if needed.
9. Insert the new bi-directional jackshaft assembly through the center of bi-
directional chain from the left side. Re-mesh the teeth on both sprockets
(A1134 and A1135) and chain links together.
10.Install the bi-directional bearing mounts to their original positions and
tighten bolts.
11. Pedal the unit in both directions to verify the alignment of the chains.
12. Install the covers.
Y.
ISO1004R Seat Pad Replacement
Seat Back Pad Replacement
1. Using a Philips screwdriver, remove the four (4) screws with washers
running through the seat frames (C1113) and into the seat back (P2588).
Older models you will need a 7/16” wrench or socket to remove the bolts
with washers that were used instead of screws. The new seat back pads
use a larger hardware size. The holes in the seat frames on the older
models may need to be slightly opened up with a drill to install the new
mounting hardware.
Summary of Contents for ISO7000R
