SCIFIT ISO7000R, Service Manual

Page: 21 / 82

21
C. User Setup
(Use this procedure for ISO7000R’s thru serial number 570-
005256.)
User Setup provides club owners and managers with certain information
about their equipment and enables them to customize certain features.
Provide power to the console by either
plugging the wall pack into the
machine and outlet or working out at a low level on the machine. Press
and hold SCAN and ENTER for three (3) seconds to enter User Setup.
Press ENTER to move from one parameter to the next parameter.
1. Language: Toggles between English and German. Use the UP or
DOWN keys to select the appropriate language.
2. Model: Displays the model of the machine that is set in the console. If
the wrong model of machine is defined, the unit will not calculate
resistance, watts, and distance correctly.
3. Version High: Displays the upper console’s software version in the
Time window.
4. Version Low: Displays the lower PCB firmware version in the Time
window. If this version number is zero, no communication has been
established between the upper and lower boards.
5. Unit of Measure: Toggles between metric and U.S. units of measure.
Use the UP or DOWN keys to select the appropriate unit of measure.
6. Communications Mode: Toggles between Cardio Key and Csafe
Comm. Use the UP or DOWN keys to select the appropriate
communications mode.
7. Message: If a message has not been entered or is invalid, the upper
display will show “NO MESSAGE”. The TIME window will display the
message screen number. The screen number range is ct1 through
ct25. Each message screen has 10 characters so the total message
can have up to 250 characters.
To enter a message, use UP and DOWN to select the appropriate
character. Characters available include the entire alphabet, numbers 0
through 9, punctuation, and a few other symbols. Press PAUSE to
move the cursor to the right and START to shift the cursor to the left.
To enter a blank space, press PAUSE without using the UP and
DOWN keys to select a character. Press ENTER to save a message
and go to the next of the 25 screens. The only method of accessing