Scientific Industries TORBAL FB Precision Series, Instruction Manual, Page: 48 / 85

46
Instruction Manual
– FB and FC Series Force Gauges
2. Use the navigation keys to select Charging and press the Enter key to change the setting.
12.9 External Input – Remote Triger (FC Models Only)
1. To Enable the Input port which allows sending external button or a pedal to be used as trigger for starting force
measurements, select External Input from the Configuration menu and press the Enter key.
2. Use the navigation keys to select Status and press the Enter key to change the setting.
Off Externa input port is disabled
Trigger Capturing measurements or starting measurement sequence is initiated single external signal.
Gate Measurements are captured only when the input port is enabled
Print Single external signal initiates the Print command.
BATTERY
1. Charging: < On. Off >
2. Level
3. Exit
CONFIGURATION
4. Time & Date
5. Keypad
6. Auto-Off
7. Battery
8. External Input
9. Firmware Update
10. Defaults
11. Exit
CONFIGURATION
4. Time & Date
5. Keypad
6. Auto-Off
7. Battery
8. External Input
9. Firmware Update
10. Defaults
11. Exit
EXTERNAL INPUT
1. Status: < Off, Trigger, Gate, Print >
2. Exit