Flip the quick release lever and remove the
nut and spring from the opposite side.
Attaching to a Bicycle with Quick Release Axles
1.
Remove the axle skewer and spring. Leave
the wheel in place.
2.
Slide the axle skewer through the coupler
plate and tab washer.
3.
Insert the axle skewer, tab washer, coupler
plate and spring through the wheel, with the
parts oriented as described in step 3.
The wide end of the
spring must face out,
touching the lever.
The
bell
on the coupler
plate should face out.
The hook on the tab
washer must face
towards the wheel hub.
4.
Rotate the quick release lever up and close
fully and tightly.
Fit the tab on the tab washer into the slot
on the bicycle frame dropout.
Place the spring and nut (removed in step 1)
on the axle skewer and tighten.
5.
6.
Follow steps 5 - 8 on Page 12.
7.
13
