The following section provides instructions for
attaching the trailer to a bicycle with rear hub nuts
or quick release.
Trailer Attachment
WARNING!
Use of the trailer without the safety strap attached
to the bicycle may result in serious injury or death.
Always attach the safety strap to the bicycle when
using the trailer.
Using a wrench, remove the hub nut and
washer from the bicycle’s back wheel.
1.
Washer
Hub nut
Place the tab washer on the axle. Fit the tab
into the slot on the bicycle frame dropout.
2.
Tab
washer
Place the coupler plate on the axle, in a
vertical position and the large hole down.
Align the pegs on the back of the plate with
the holes in the tab washer.
3.
Place the hub nut and washer back on the
axle and tighten.
Coupler
pegs
Coupler
plate large
hole
4.
Washer
Hub nut
Coupler
plate
Slot
Tab
11
