background image

Storing the Trailer

pole sections.
Remove the rear wheels:

1. Find the release lever on the wheel  

  bracket.
2. Pull the release lever straight out and hold.
3. Remove the wheel.
4. Release the lever.

Remove the locking pin from the tow bar 

bracket (located at the front corner of the 

trailer).
Fold the tow bar underneath the trailer.
Place the locking pin back through the tow bar 

and bracket.
Place all loose items inside the passenger 

compartment.
Carefully fold the frame down.
Store in a dry place. 

1.

2.

3.

4.

5.

WARNING!

There are pinch points between the sidewalls and 

the frame of the trailer that may cause injury. Al-

ways fold or unfold the trailer slowly and with cau-

tion. Keep children clear when folding or unfolding 

the trailer.

6.
7.

8.

Accessories

The following accessories can be ordered from 

www.schwinnbike.com

  Additional Coupler Kits (includes; coupler plate, 

tab washer and locking pin)

  Additional Stroller Kit (includes front wheel, 

padded handlebar, parking brake)

Important!

 If the storage area is hot then release 

some air from the tires. This will help prevent  

excessive expansion or popping.

18

Summary of Contents for Spirit Trailer






















Reviews: