Basic Troubleshooting
Problem:
Chain Makes a Grinding Sound
Solution:
Chain too tight and/or the flywheel out of alignment.
A. Use a 15mm wrench to loosen each axle nut.
B. Adjust the 10mm chain tensioner bolts to align the flywheel
with the frame. Make sure that the chain tensionis adjusted
properly without being too tight.
C. Adjust the chain tension by locating the point where the
chain is tightest during one revolution of the crank.
D. Check the tension. You should be able to move the chain up
and down about 3/8” (in either direction).
E. Lubricate the chain.
F. Take the bike for a test ride.
Figure 5
Problem:
Bike is Wobbling or Uneven While Riding
Solution:
A. Check the foot levelers on the bottom of the stabilizers.
B. Adjust the levelers and the bike until it is square on the floor.
C. Secure the leveler nuts to prevent them from loosening.
(See Figure 5.)
Service Manual
9
Summary of Contents for IC ELITE
Page 13: ......
