Schwinn IC ELITE Service Manual Download Page 3

1.   Keep children away from this machine and / or supervise them closely if they are near the machine or present during its operation.  

This machine is not suitable as a children’s toy. There is a natural tendency for children to want to play on exercise equipment and 
parents and other in charge of children should be aware of their respective responsibilities. Moving parts that may appear to present 
obvious hazards to adults may not appear to do so to children.

2.   Consult a physician prior to commencing an exercise program.  If, at any time, you feel faint or dizzy, or experience pain, stop and 

consult your physician.

3.  

Inspect this machine for loose parts or signs of wear.  Pay special attention to the Seat, Pedals, and Crank Arms.  Do not use if found in 
this condition;  contact Schwinn Customer Service.

4.

  Set up and operate this exercise machine on a solid level surface.

5.   This machine contains moving parts.  Use Caution.  Do not wear loose clothing or jewelry.

6.   This machine is designed for a User’s Weight Limit of 300 pounds (136) kilograms.  Do not use if you are over this weight.

7.    Set up the machine so that there is a free area of 19.7 inches ( 0.5 m) on all sides of the machine. Keep third parties out of this 

area when the machine is in use.

8.   Operate the machine in the manner described in this manual.  It can be hazardous to over-exert yourself during exercise

9.  Make sure that all positional adjustment devices are securely engaged.

Important Safety Warnings

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.  
Failure to follow these precautions can cause damage to the Schwinn

®

 IC Bike series, serious injury to users and 

bystanders, and can also compromise the effectiveness of your exercise program.

Read and understand the complete Owner’s Manual.
Read and understand all Warnings on this machine.

Before using this equipment, obey the following warnings:

Service Manual

4

Summary of Contents for IC ELITE














Reviews: