Schwing SP 1800, Original Operating Instructions

Page: 468 / 492

2.7.3 Remote control
You must always carry the remote control on your person when the
machine is ready for operation. Only in this way can it be guaranteed
that you can press the EMERGENCY STOP
BUTTON
in the event of an
emergency situation. The EMERGENCY STOP
BUTTON
may only be
unlocked once the cause/emergency has been remedied.
As a general rule, you must carry the remote control so that no con‐
trol elements are activated unintentionally. If your attention is drawn
away from the machine (particularly when changing place of work),
you must switch off the remote control.
During breaks in pumping, interruptions, maintenance work, or before
you leave the machine, you must secure it to prevent unintended
movements and unauthorised use. Switch off the remote control and
lock it away.
2.7.4 Moving machine components and hot surfaces
Keep all access covers, maintenance flaps, guards, etc. closed and
locked during operation. This also applies in particular to the grille,
water box cover and covers over cylinders. There is otherwise a risk
of injury from moving machine components and a risk of burning on
hot surfaces. In particular, there is a risk of burning from the engine,
attached parts and the exhaust.
Never start work unless the grille is closed and bolted down or other‐
wise secured.
Do not touch moving parts of the machine, whether the machine is
running or switched off. Always switch off the engine first, and dump
the accumulator pressure where an accumulator is fitted.
Safety Manual
Concrete delivery and placing machines
50
01/2018 Rev16 EN