34
Changing the magnification display number
After selecting a magnification table, you can choose whether or not the current magnification value displays on
the screen as you turn the black MAGNIFICATION dial .
To set your preference, do the following:
1. Press the black ADVANCED button until the magnifying glass icon displays on the screen.
2. Press the red FREEZE FRAME button
to select how magnification values display. This is represented by
the magnifying glass icon.
Select to display the magnification in use relative to the 16 positions of the black
MAGNIFICATION dial , for example 1, 2, 3.
Select if you do not want any magnification value to display as you turn the black
MAGNIFICATION dial .
Select to display the actual magnification value, for example, 5.2, 6.4, 7.9, and so on.
3. To save changes and exit Configuration mode, press and hold the black ADVANCED button and the orange
FIND button for approximately 10 seconds until the on-screen display at the bottom of the screen closes.
To discard all changes made while Configuration mode is open, do not touch any control panel buttons or
dials for approximately 30 seconds. This closes Configuration mode without saving changes.
