10
Manually powering the unit on and off
The unit automatically powers on when you open it and move the monitor from its closed position.
The unit powers off when you collapse and close it.
To manually power the unit on and off, do the following:
1. Press the POWER button . It is located next to the power jack on the left side of unit.
If the unit is off, the reading light turns on, and the camera’s current view displays on the screen.
2. If an image does not display on the screen, try the following:
Press the POWER button on the side of the unit.
Make sure the power cord is connected to the unit
Make sure the power cord is plugged into a power outlet
If a battery is installed, verify that it is charged. A flashing red LED indicates low battery. See Battery Status
on page 8 for more information.
Ensure that the wall outlet has power and is not malfunctioning. If the outlet is connected to a wall switch,
make sure the switch is on.
For more solutions, refer to Troubleshooting on page 44.
3. To turn the unit off, press the POWER button again.