schwa-medico EMP 4 Expert, Operating Instructions Manual, Page: 14 / 28

Parameters channels 1 +
The parameters indicated here apply to channels 1 and 2 only .
The values could be changed by using the modification keys .
Pulse form channels 1 and 2
Pulse width channels 1 and 2
Frequency channels 1 and 2
Parameters channels + 4
The parameters indicated here apply to channels 3 and 4 only .
The values could be changed by using the modification keys .
Pulse form channels 3 and 4
Pulse width channels 3 and 4
Frequency channels 3 and 4
.. Stimulation screen
All necessary parameters are displayed on the stimulation screen
and stimulation may be started .
shows the number of stimulation cycles .
Use the key to return to the previous setting .
Use the key to start stimulation .
.. Preset intensity
After pressing the key, intensity of all channels, without
set intensity modulation (ramps), can be set with the modification
keys to a pleasant value .
The flashing dot marks this setting mode .
Use the key to stop stimulation .
Use the key to increase intensity of all 4 channels simul-
taneously .
14
Operating Instructions EMP 4 Expert
CHANNEL 1+2
CHANNEL 3+4