schwa-medico EMP 4 Expert, Operating Instructions Manual, Page: 10 / 28

.1. Stimulation screen
All necessary parameters are displayed on the stimulation screen
and stimulation may be started .
shows the remaining duration of the stimulation .
Use the key to return to the previous setting .
Use the key to save the current parameter setting (please
refer to chapter 7 .1 .7) .
Use the
key to start stimulation .
.1. Setting intensity
After pressing the key, intensity of all channels without
set intensity modulation (ramps), can be set with the modification
keys to a pleasant value .
The flashing dot marks this setting mode .
Use the key to stop stimulation .
Use the
key to increase intensity of all 4 channels simul-
taneously .
Agonist/Antagonist stimulation:
Use the
key to increase intensity of channels 1 and 2 .
Use the key to increase intensity of channels 3 and 4 .
.1.4 Starting stimulation (running the programme)
The
EMP 4 Expert
will run the programme after setting intensity
(flashing circels) . The stimulation icons and the flashing dots mark
the course of stimulation .
Use the
key to stop stimulation .
Use the
key to check set parameters and to change them
if necessary .
Use the
key to interrupt stimulation (pause) .
.1. Stimulation icons
Standard stimulation
Intensity modulation: Pause
Intensity modulation: Ramp
Intensity modulation: Work
10
Operating Instructions EMP 4 Expert
PARAMETERS
PARAMETERS
PARAMETERS