schwa-medico EMP 4 Expert, Operating Instructions Manual, Page: 13 / 28

1
Operating Instructions EMP 4 Expert
. Biofeedback
In this operation mode a stimulation cycle before set with an in-
tensity also before set can be started by using the start key or an
external knob (trigger) . The number of stimulation cycles can be
adjusted .
A stimulation cycle consists of: Ramp – Work – Ramp – Pause .
..1 Setting the stimulation parameters
On the next screen, the parameters may be altered within their
respective limits by using the modification keys .
Use the key to return to the previous setting .
Use the key to select the next parameter .
Use the key to go to the next screen .
General parameter 1
The parameters indicated here apply to all 4 channels . The values
could be changed by using the modification keys .
Increasing ramp
Work
Decreasing ramp
General parameter
The parameters indicated here apply to all 4 channels . The values
could be changed by using the modification keys .
Pause
Number of stimulation cycles
GENERAL
GENERAL