SCHUNK ROTA-S flex, Assembly And Operating Manual

Page: 30 / 40

Maintenance
30 06.00 | ROTA-S flex | Assembly and Operating Manual | en | 0889139
9 Maintenance
The item numbers specified for the corresponding individual
components relate to chapter drawings.
} 11 [ / 33]
A high bearing load capacity with secure workpiece clamping can
only be guaranteed by lubricating regularly with a high-
performance lubricant. For this reason, we recommend that the
chuck is cleaned regularly and lubricated using LINOMAX plus
special grease. The chuck will have to be disassembled and
cleaned at regular intervals according to its application.
CAUTION
Allergic reactions due to grease in contact with skin!
Wear gloves.
9.1 Disassembling and assembling the chuck
Remove the base jaws from the chuck as described in chapter
"Handling and jaw change"
}
8.1 [
/
28]
Unscrew the screws (item 33) and remove the guideway extension
(item 4). Screw out the screws (item 33) and undo the ROTA-S flex
from the baseplate (item 3), taking it off to the front.
For further disassembly and assembly of the chuck, see the
ROTA-
S plus or ROTA-S plus 2.0 Assembly and Operating Manual.
WARNING
Risk of injury due to dropping the manual chuck during
transport, installation or removal
During transport and when installing or detaching the manual
chuck, ensure it does not fall off.
9.2 Jaw change
Clean and lubricate jaws if there is no film of grease.