Basic safety notes
12
02.00|1416054_ROTA-M2 + 2 |en-US
If the clamping force has dropped too much or if the base jaws no
longer move properly, the chuck must be disassembled, cleaned,
and relubricated
Personnel qualification
The following personnel qualifications are required for the various
types of work on the product:
Specialist personnel have the specialized training, knowledge, and
experience to perform the tasks entrusted to them, to recognize
and avoid potential dangers, and know the relevant standards and
regulations.
The user has been instructed by the operator regarding the tasks
entrusted to them and the potential dangers of inappropriate
behavior. The user may only carry out tasks that go beyond the
use in normal operation if this is indicated in this manual and the
operator has expressly instructed them to do so.
•
Order all work to be performed only by appropriately qualified
personnel.
•
Personnel must have read and understood the complete
manual before beginning any work on the product.
•
Observe national accident prevention regulations and the
general safety notes.
Inadequate qualification of personnel
Any work on the product by inadequately qualified personnel can
lead to serious injuries and considerable material damage.
2.7
Specialist personnel
User
