Maintenance
48
02.00|1416054_ROTA-M2 + 2 |en-US
10 Pull off the four locking bolts (item 15)
11 Remove the middle drive ring (item 12)
12 Pull off the upper drive ring (item 11), remove the two
connecting members (item 7) from the upper drive ring (item
12)
13 Remove the wedge bars (item 5) from the chuck body (item 1)
14 Remove the indicator pin (item 19) and springs (item 38) from
the chuck body (item 1)
15 Remove screws (item 34) and pull off the cover plates (items
23 and 24)
16 Turn over the chuck body (item 1)
17 Remove screws (item 33) and then remove the cover (item 3)
with the O-ring (item 37) and wipers (items 21 and 22)
18 Remove the O-ring sections (item 26) and sealing elements
(item 25)
19 Remove the base jaws (item 2)
20 Remove the bolts (item 18)
Degrease and clean all parts and check them for damage.
Before assembly, grease well with LINOMAX.
Only use original SCHUNK spare parts when replacing damaged
parts.
