Assembly and settings
01.01|RP / RW / RC 1212-2128|en
21
Fig. 4: Position of the proximity switches at the GMW is analogous to the GMC and GMP
1
Proximity switch (GMNS-...)
1 Disassemble the drive unit or, if need be, the maintenance of
gripping force unit.
2 Push the holding piece into the drive unit.
3 Reassemble the drive unit or, if need be, the maintenance of
gripping force unit.
4 Push the sensor into the holding piece and clamp with the fix-
ing screw in the holding piece. This is also accessible when the
cover is mounted or when the maintenance of gripping force
unit is installed.
1 Undo the attachment screw in the drive unit.
2 Set the sensor via the holding piece.
3 Fix the sensor via the attachment screw.
Assembly of the
end-position moni-
toring
Setting the
monitoring
www.comoso.com
