Basic safety notes
8
01.01|RP / RW / RC 1212-2128|en
Basic safety notes
Intended use
The module is designed solely for the gripping and swiveling of
useful loads into any desired position, where the load does not
react in a manner endangering persons, property or the environ-
ment as a result of this manipulation.
The product was designed to grip and to temporarily and securely
hold workpieces and objects.
The product is intended for installation in a machine/system. The
requirements of the applicable guidelines must be observed and
complied with.
The product may be used only in the context of its defined applica-
tion parameters
The product is designed for industrial use.
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Not intended use
Use which is not specified as an intended use is for instance when
the product is for example used as a pressing tool, stamping tool,
lifting tool, guide for tools, cutting tool, tensioning mean, boring
tool.
Environmental and operating conditions
•
The module may be used only within its defined application pa-
rameters.
•
Ensure that the environment is clean. Observe the lubrication
•
Ensure that the environment is free of splashing water and va-
pors, and also of abrasive dust and process dust. This does not
apply to modules designed especially for unclean environ-
ments.
•
Do not subject the module to excessive vibrations and/or me-
chanical shocks.
2
2.1
2.2
2.3
www.comoso.com
