SCHUNK PZV, Assembly And Operating Manual

Page: 42 / 52

Maintenance
42 10.00 | PZV | Assembly and Operating Manual | en | 389384
7 Maintenance
7.1 Notes
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
Exchange of housing and base jaws
The base jaws and the guidance in the housing are matched. To
exchange these parts, send the product with a repair order to
SCHUNK or order the housing with the base jaws as a set.
7.2 Maintenance intervals
CAUTION
Material damage due to hardening lubricants!
Lubricants harden more quickly at temperatures above 60°C,
leading to possible product damage.
•
Reduce the lubricant intervals accordingly.
Maintenance- and lubrication interval
Interval (million cycles)
for PZV 64 – 200
Maintenance work
2 Clean all parts thoroughly, check for
damage and wear, if necessary replace
seals and wearing parts,
}
7.4 [
/
43] .
The seals are in the enclosed sealing kit.
}
1.4.1 [
/
7] .
2 Treat all grease areas with
lubricant,
}
7.3 [
/
43] .
Oil or grease external steel parts.