SCHUNK iTENDO2 pad, Assembly And Operating Manual

Page: 9 / 60

Basic safety notes
2.7 Personnel qualification
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
• All work may only be performed by qualified personnel.
• Before working with the product, the personnel must have read
and understood the complete assembly and operating manual.
• Observe the national safety regulations and rules and general
safety instructions.
The following personal qualifications are necessary for the various
activities related to the product:
Qualified personnel Due to its technical training, knowledge and experience, qualified
personnel is able to perform the delegated tasks, recognize and
avoid possible dangers and knows the relevant standards and
regulations.
Instructed person Instructed persons were instructed by the operator about the
delegated tasks and possible dangers due to improper behaviour.
Service personnel of
the manufacturer Due to its technical training, knowledge and experience, service
personnel of the manufacturer is able to perform the delegated
tasks and to recognize and avoid possible dangers.
2.8 Obligations of the operator
The operator must ensure that:
• The product is only used as intended.
• The product is only operated in a perfect and fully functional
status.
• The correct functioning of the product is checked regularly.
• The operating manual is always kept in a complete and legible
condition close to the product.
• The product may only be operated and maintained by
sufficiently qualified and authorized personnel.
• The personnel is familiar with the contents of the operating
manual, in particular the safety notes contained therein.
• The personnel are regularly instructed in occupational safety
and environmental protection.
9 03.00 | iTENDO² pad | Assembly and Operating Manual | en | 1494155