SCHUNK iTENDO2 pad, Assembly And Operating Manual

Page: 33 / 60

iTENDO² tablet and iTENDO² app
6.5.3 Connecting/disconnecting iTENDO²
Connecting iTENDO²
1. Make sure that the Bluetooth connection is enabled on the
iTENDO² tablet
}
6.4 [
/
26] .
2. Start the iTENDO² app
}
6.5.2 [
/
31] .
3. Start the scan process by tapping the "ITN-TH-DEMO" button
(1).
✓
A list of sensors where a connection is possible appears.
NOTE: If the desired sensor does not appear, connect the
iTENDO² to the iTENDO² charger and try again later.
4. Tap the desired sensor (2).
✓
Connection to the sensor is established, the data appears in
the iTENDO² app.
NOTE: In the "Sensor" display mode, the description of the
respective iTENDO² can be changed } 6.5.6.7 [
/
49] .
Disconnecting the iTENDO²
• Tap the selection field with the description of the sensor (3).
✓
The connection is terminated and a list of sensors where a
connection is possible appears.
33 03.00 | iTENDO² pad | Assembly and Operating Manual | en | 1494155