SCHUNK EGM B-L-30-1x2, Assembly And Operating Manual

Page: 4 / 48

Table of Contents
4
01.00 | EGM | Assembly and Operating Manual | en | 389539
4 Design and description............................................................................................ 23
4.1 Structure............................................................................................................. 23
4.2 Description ......................................................................................................... 24
4.3 Magnetic suitability of the workpiece material.................................................. 25
4.4 Factors influencing the holding force ................................................................. 26
5 Assembly ................................................................................................................ 27
5.1 Installing and connecting.................................................................................... 27
5.2 Connections........................................................................................................ 27
5.2.1
Mechanical connection........................................................................... 27
5.2.2 Electrical connection .............................................................................. 30
5.3 Using the distributor box (optional) ................................................................... 33
5.4 Installing the pole extension (optional).............................................................. 35
6 Commissioning ....................................................................................................... 37
6.1 General instructions on commissioning ............................................................. 38
6.2 Operation with controller ECG-C or ECG-W ....................................................... 39
6.3 Operation with controller ECG-R........................................................................ 40
7 Trouble shooting..................................................................................................... 41
7.1 Product remains inoperable even after the power supply is turned on ............ 41
7.2 Workpiece is detached from the product .......................................................... 41
7.3 Demagnetization was not performed correctly. ................................................ 41
8 Maintenance .......................................................................................................... 42
8.1 Maintenance intervals........................................................................................ 42
8.2 Check and repair the product............................................................................. 42
9 EU Declaration of Conformity ................................................................................. 43
10 Translation of original declaration of incorporation ................................................ 44
11 Annex to Declaration of Incorporation .................................................................... 45