Assembly
01.00 | EGM | Assembly and Operating Manual | en | 389539
35
5.4 Installing the pole extension (optional)
NOTE
Use of a pole extension reduces the permissible load capacity by
up to 50%.
Pole extensions are only available for bipolar products. The
assembly of a pole extension can improve safe holding of round
workpieces, for example.
Pole extension (schematic diagram using example EGM B-Q 1x4)
Ø
For assembly, observe the following dimensions and tightening
torques; these are distinguished depending on size.
Ø
Screw the centering pins (2) into the steel housing of the
product (1).
Ø
Insert the pole extension (3) into the centering pins (2).
Ø
Screw the pole extension (3) using fastening screws (4) onto the
magnetic poles (5).
