SCHUNK EGM B-L-30-1x2, Assembly And Operating Manual

Page: 30 / 48

Assembly
30
01.00 | EGM | Assembly and Operating Manual | en | 389539
5.2.2 Electrical connection
DANGER
Danger from electric voltage!
Touching live parts may result in death.
•
Switch off the power supply before any assembly, adjustment
or maintenance work and secure against being switched on
again.
•
Only qualified electricians may perform electrical installations.
•
Check if de-energized, ground it and hot-wire.
•
Cover live parts.
CAUTION
Damage due to faulty connection!
A faulty connection can cause damage to the product.
•
Observe the pin allocation of the connecting terminals.
•
Make sure that all components are grounded correctly.
The product is connected directly or via a distributor box to the
controller ECG. A power cable is required for the connection,
Accessories [
}
7].
■
The controller ECG to be connected is disconnected from the
electrical network.
Ø
Connect the socket of the power cable to the product's
connecting plug.
Ø
Close the locking clip on the connecting plug.
Ø
Install the power cable correctly.
Ø
Connect the open wire strands of the power cable, Connection
assignment of the power cable [
}
31]:
✓
Connect to distributor box, Using the distributor box
(optional) [ } 33].
✓
Connect to controller, Applicable documents [ } 6].