Maintenance
48
02.00 | PW V6 | Assembly and operating manual | en | 389670
7 Maintenance
7.1 Maintenance intervals
Size
70
90
Interval [Mio. cycles]
2
2
The product conforms to protection class IP 54 when the DMI
connection cap is mounted.
• Clean the product dry (do not use water or liquid cleaners);
remove all coarse dirt and chips from the cavities in the
product.
• Check for damage and replace the product if necessary.
Any repair work on the product may only be carried out by
SCHUNK.
7.2 Disassembly and assembling
This product must not be disassembled for maintenance.
NOTICE
Material damage due to improper disassembly!
Incorrect works can cause damage to the mechanics and internal
electronics.
•
Disassembly or opening of the product is not permitted.
•
Only allow SCHUNK to repair the product.
