5
7.
GROUNDING AND AC POWER CORD CONNECTIONS
WARNING
RISK OF ELECTRIC SHOCK OR FIRE.
7.1
This battery charger is for use on a nominal 230V, 50 Hz circuit. (See the warning
label on the charger for the correct input voltage.) The plug must be plugged into
an outlet that is properly installed and grounded in accordance with all local codes
DQGRUGLQDQFHV7KHSOXJSLQVPXVW¿WWKHUHFHSWDFOHRXWOHW'RQRWXVHZLWKDQ
ungrounded system.
7.2
DANGER
1HYHUDOWHUWKH$&FRUGRUSOXJSURYLGHG±LILWGRHVQRW¿WWKHRXWOHWKDYH
DSURSHUJURXQGHGRXWOHWLQVWDOOHGE\DTXDOL¿HGHOHFWULFLDQ$QLPSURSHUFRQQHFWLRQFDQ
result in a risk of an electric shock or electrocution.
7.3
Recommended minimum AWG size for extension cord:
100 feet (30.5 meters) long or less – use a 10 gauge (6 mm
2
) extension cord.
Over 100 feet (30.5 meters) long – use an 8 gauge (10 mm
2
) extension cord.
8. FEATURES
1.
Ammeter
2.
Voltmeter
3.
Foam Grip
4.
Fiberglass Clamp Rod
5.
Battery Clamps
6.
Charge Rate Selector Switch
7.
Timer
8.
Wheel
1
2
3
4
5
6
7
8
9. ASSEMBLY
INSTRUCTIONS
It is important to fully assemble your charger before use. Follow these instructions
for assembly.
Item PARTS
TOOLS
NEEDED
1
2
3
4
5
6
7
8
9
10
11
12
(2) axle brackets
(1) axle with pin holes
(2) wheels
(2) 10-32, thread cutting screws
(2) ¼-20, thread cutting screws
(1) foot
(2) axle caps
(2) hairpin cotter
(4) 8-18 sheet metal screws
(1) handle
¿EHUJODVVFODPSURG
(1) foam handle grip
3/8" wrench (for mounting foot)
5/16" wrench (for mounting wheels)
1/4" wrench (for mounting handle)
hammer
VFUHZGULYHUÀDWEODGH
screwdriver (Phillips)
