Be careful not to damage
the polished shock rod.
Shock Shaft Pliers
AM190031B Multi Shock Clamp - V3 - Black
AM190031G Multi Shock Clamp - V3 - Grey
CR100 Shock Shaft Pliers - Purple
CR101 Shock Shaft Pliers - Black
Move the piston up and down slowly
and let the air bubbles rise to the top
of the shock body before you continue
SHOCK OIL
550 cSt
Push the piston rod fully into
the shock.
Place the diaphragm onto the top of the
shock displacing the excess oil.
Fit the shock cap.
Shock should move up and down, with
smooth action.
Start with the 2mm spacer only.
Additional spacers may be added later.
Grip shaft here when using regular pliers.
30.00mm
8.00mm
STEP 37
PAGE 34
Summary of Contents for CAT XLS Masami
