Schulte FX-310 Operator'S Manual Download

Page: 78 / 176

OPERATION

FX-315/FX-310 03/21

Operation Section 4-16

6.3 Rear Deflector Kit

The Rear Deflector Kit is designed to offer

adjustment with the FX-315 material distribution.
The wing deflectors offer three levels of adjustment.

The Adjustment Arm can be attached to the Float

linkage using one of two holes on the Adjustment

arm and one of three holes on the Float Linkage.

The Adjustment arm can then be attached to the

main deflector body using one of five Adjustment

Holes.

The center deflector has two levels of adjustment.

The Adjustment Arm can be attached to the

Adjustment link using one of four holes. The

Adjustment Arm can also be attached to the main

body of the deflector using one of five Adjustment

Holes.

6.4 Shrouding Kit

The shrouding on the FX-315 includes a fixed

component and an adjustable component.
For a wider material distribution, the shrouds should

be set to the position closest to the cutter. To

reduce the amount of material distributed, the

shrouds should be set to the position furthest from

the cutter.

Summary of Contents for FX-310

















































































































































































Search results

Summary of Contents for FX-310

Reviews:

Related manuals for FX-310

Brands by name

Popular brands

Schulte FX-310, Operator'S Manual

Search results

Summary of Contents for FX-310

Reviews:

Related manuals for FX-310

Brands by name

Popular brands