Schulte FX-310, Operator'S Manual, Page: 112 / 176

OPERATION
FX-315/FX-310 03/21 Operation Section 4-50
© 2021 Alamo Group Inc.
O
PE
R
AT
IO
N
Tire Size and Matching Requirements - Center Axle
Tire assemblies when mounted on center axle duals should always be within limits listed.
Laminated Tires - Maximum difference between tire diameters on a center axle should be 1/2 inch or less.
Foam Filled Airplane Tires - Maximum difference between tire diameters on a center axle should be 1 inch or
less.
When replacing a tire assembly on center axle, always check diameters to make sure tires fall within allowed
range for maximum tire and wheel life. It may be necessary to move one or more tires from wing axles to
remain within size limit.
All tires will generate heat during transport, some more than others depending upon tire construction. The
amount of heat being generated by a tire depends on the speed of travel and the load on the tire. The amount
of heat build up in that tire is dependent upon the travel time. Caution must be taken to prevent any tire from
overheating. The tires should be checked periodically during transport. If the tires are beginning to overheat,
they should be allowed to cool and the travel speed should be lowered.
Faster than recommended transport speeds during delivery of a machine to a customer or general transport
from job site to job site can cause serious tire damage and potential failure.
Please see chart below for tire speed ratings and recommended inflation pressures.
13.1 Tire and Wheels
Laminated Sectional Tires are designed for conditions where puncture proof performance is required and
the mower will not be transported for long distances on roadways. Transport speed for laminated tires should
not exceed 15 MPH. Excessive speed can cause damage to the machine and tire sections. Laminated tires
must be installed with the laminations orientated as shown.
Foam Filled used Airplane Tires are ideal for conditions where a puncture proof tire is needed and the
mower is frequently transported between locations.
Pneumatic Tires Implement tires are ideal for frequent long distance towing, however, they are not puncture
proof and are not recommended for mowing brushy areas or other conditions that could damage the tires.
Check side wall of tire for proper inflation pressure. DO NOT over-inflate.
OPS-R-0035