S.B 1956; S.B 1959
10000429979-09.2016-02 | 24
Schüco International KG · Karolinenstraße 1–15 · D33609 Bielefeld
8. Maintenance
The gear unit is lubricated for life and is therefore maintenance-free.
Lightly grease the latchbolt head 1x annually.
9. Disposal
The motor-driven lock must be disposed of as electronic waste at special waste disposal sites!
The motor-driven lock should not be disposed of as domestic waste!
Packaging must be disposed of separately.
Problem
Cause
Remedy
Red LED on
•
Lock overload
•
Check whether the lock is
mechanically blocked
(see point "Lock does not
unlock")
•
Cylinder cam not in removal
position (see fig. 2)
•
Remove the key
To reset, fully retract the latchbolt 3x from the "locked position" via the
locking cylinder.
Overload during daytime release: Perform complete motor-driven
unlocking operation 1x via control signal followed by full retraction of
the latchbolt 3x from the "locked position" via the locking cylinder.
